Driver for Dynaco ST-70 including module AB for autobias,

Assembleddriver st-70 and AB-Q

click to enlarge

Manufacturer:	TES
Price :	82,00 €

Tubes Amplifiers - Preamplifiers - Drivers

ST-70 & AB, Dynaco ST-70 kit

We are pleased to offer you our latest kit, our Dyna-70. This kit will replace the original Dynaco driver circuit and printed circuit board, using the excellent sounding 12AX7 and 12AU7 triode. Tubes are NOT included with the kit!

This kit will change the way your tired old Dynaco ST-70 will sound and look!

Driver board and AB-Q-ST70/ST120 auto bias is pre assembled as it mostly uses surface mount parts.

The benefits of upgrading your Dynaco ST-70 amp with our Dyna-70AB kit are:

- a modern tube circuit using a LM334 based constant current source for a stable circuit

- with the auto bias, there no more having to keep an eye on the output tube bias setting. The auto bias module will keep the pre-set bias for the life of the power tube! The bias level is pre-set by us to suit the EL34 family of tubes.

- not to mention that your ST-70 amp will look pretty cool with with blue LEDs that shine !

Should a tube fail of the auto bias module can no longer maintain the preset bias level, the relevant LED will go out indicating that the power tube needs to be replaced. It is THAT simple!

Even tubes that are not well matched, the auto bias module will maintain each tubes' bias level at the preset level! So the output stage is always well balanced and held in equal bias!

Goods of the same category - Driver for Dynaco ST-70 including module AB for autobias,

3 Band Preamplifier - Double Bass, Bass, Treble, tubes on the parts side. Dimensions are 162mm x 84mm x 25mm high / 6.4" x 3.3" x 1" high (without tubes)

Assembled Pre-amplifier plate without tubes, tubes on the parts side Assembled Pre-amplifier plate without tubes

PCB - RIAA Preamplifier, tubes on the parts side

PCB Pre-amplifier plate without tubes PCB for RIAA Pre-amplifier, tubes on the parts side

3 Band Preamplifier - Double Bass, Bass, Treble. Dimensions are 162mm x 84mm x 25mm high / 6.4" x 3.3" x 1" high (without tubes)

Assembled Pre-amplifier plate without tubes Assembled Pre-amplifier plate without tubes

PCB - 3 Band Preamplifier - Double Bass, Bass, Treble, tubes on the parts side. Dimensions are 162mm x 84mm x 25mm high / 6.4" x 3.3" x 1" high (without tubes)

PCB Pre-amplifier plate without tubes PCB for 3- Band Pre-amplifier

PCB - 3 Band Preamplifier - Double Bass, Bass, Treble

PCB Pre-amplifier plate without tubes PCB for 3- Band Pre-amplifier

RIAA Phono Preamplifier for magnetic phono cartridge. Dimensions are 162mm x 77mm x 18mm high / 6.4" x 3" x 1" high (without tubes)

Assembled RIAA Pre-amplifier plate without tubes Assembled RIAA Pre-amplifier plate without tubes

RIAA Phono Preamplifier for magnetic phono cartridge, tubes on the parts side. Dimensions are 162mm x 77mm x 18mm high / 6.4" x 3" x 0.72" high (without tubes)

Assembled RIAA Pre-amplifier plate without tubes, tubes on the parts side Assembled RIAA Pre-amplifier plate without tubes

PCB - RIAA Preamplifier

PCB Pre-amplifier plate without tubes PCB for RIAA Pre-amplifier

Installation manual of the driver board ST70_drev.pdf

Up | Print this page

Your name	e-mail
Email your friend
Look at the https://www.audioamp.eu/driver-for-dynaco-st-70-including-module-ab-for-autobias/
Enter the code from the image

Driver for Dynaco ST-70 including module AB for autobias,

Goods of the same category - Driver for Dynaco ST-70 including module AB for autobias,

Do you need advice? Driver for Dynaco ST-70 including module AB for autobias, TES

Send link to a friend